DESIGN FEATURES

• IP65 - lifts for outdoor installation.
• Electro-hydraulic operating lifts.
• Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture.
• Self-controlled lowering speed.
• Mechanical safety latch with automatic engagement and hydraulic release ensuring maximum safety when lift is in parking position.
• Rollers for carriage movement fitted on selflubricating bearings requiring no maintenance.
• Warning light when the lift is in parking position.
  
  Modular electrical systems enable alterations to be made to configuration (e.g. passing 4 to 6 to 8 columns or creating two set s of 4 columns by splitting a set of 8 columns).
  
  OPERATING FEATURES
  • Electronic system ensuring synchronization of all columns (PLC programmable controller with self-diagnostic system) should the maximum permitted difference in level be exceeded between the carriages. Safety stop in case of malfunction.
  • Selection of several operating modes possible on the master control box:
    • Simultaneous operation of all columns.
    • Simultaneous operation of one or more pairs of columns.
    • Single operation of each column.
    • Electronic device selects automatically the correct main supply phase sequence.
  • Low voltage controls (24 V) on all columns with dead-man push buttons and safety interlock in case of interference in the activated control.
  • Possibility of setting a different height between pairs of columns while retaining the subsequent control level synchronization.

  Main control panel of the main column featuring all selection and controls.
  
  Secondary control panel, featuring lifting and lowering controls and emergency stop button.
  
  Large and solid base for maximum stability under load with selfsupporting transportation steel wheels.
  
  Hydraulic towing jack.

  SAFETY FEATURES

  • Mechanical and electrical safety devices comply with European Safety Regulations.
  • Thermal protection against overload of motors.
  • Emergency stop button with self retainer on all columns.
    
    

    DESIGN FEATURES

    • Electro-hyrdraulic operating lifts
    • Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture
    • Self-controlled lowering speed
    • Mechanical safety latch with automatic engagement and hydraulic release ensuring maximum safety when lift is in parking position
    • Rollers for carriage movement fitted on selflubricating bearings requiring no maintenance
    • Warning light when the lift is in parking position.
    
    
    

    Technical Data	298 H Series
    Load capacity per lift	8,5 t
    Motor	2,6 KW
    Required mains power per column	5,5 kW-16,5 A
    Master column weight	570 kg
    Slave column weight	550 kg
    Rise time	100”
    Maximum tyre diameter	1.200 mm
    Minimum tyre diameter	900 mm
    Minimum rim diameter	580 mm